If you want aluminium window repairs or window-edge waterproofing finished before the New Year, we recommend booking a technician's inspection now. Technicians generally do not work over the New Year's Day and Chinese New Year holidays, and schedules are tight in the weeks around them; the earlier you inspect and confirm the works, the better your chance of finishing before the holidays and celebrating with your family with peace of mind.
At the end of every year, many owners want to deal with their window problems during the big year-end clean: loose hinges, handles that are hard to close, water marks at the window edge. But they often leave it until just before the New Year to call a technician, only to find the schedule is full, and end up carrying the problem into the New Year.
Why Arrange Aluminium Window Repairs Early Before the New Year?
Technicians generally do not work over New Year's Day and Chinese New Year, and the one or two weeks before the holidays are a peak period for families rushing renovations and repairs. If you only book a few days before the holidays, a visit may not be possible, let alone completion of the works.
Some works also need lead time. Replacing hinges or handles, or replacing weatherstrips, can generally be done in a single visit; but if new window frames need to be custom-made, this generally takes about two to three weeks, so allow enough time.
In addition, the period from year-end to early spring is relatively dry, which is a suitable time for waterproofing works. Waterproofing is best done on dry, sunny days, so dealing with window-edge leaks before the New Year also prepares your home for next year's rainy and typhoon seasons.
5 Aluminium Window Problems to Check Before the New Year
During your year-end clean, check each window at the following points, note down any problems and tell the technician about them all when you book:
| Location | Common problems | Suggested fix |
|---|---|---|
| Hinges | Oxidised, sash sagging, noise when opening or closing | Replace with 304 stainless steel hinges |
| Handles | Loose, oxidised or snapped; window does not close tight | Replace the handle or add a multi-point lock |
| Silicone rubber weatherstrips | Hardened, shrunk or melted; wind and water get in | Replace the weatherstrips |
| Frame-to-wall joints | Cracked silicone sealant; water marks or mould | Scrape out the old sealant and re-apply silicone sealant |
| Anti-wind clips and stays | Loose; sash moved by the wind | Tighten or replace the fittings |
For hinge, handle and weatherstrip problems, consider doing them all at once with Four-Treasure Works; for window-edge leaks, the source should be found first before arranging window-edge waterproofing works.
Suggested Pre-New Year Repair Timetable
The timetable below is for reference; actual scheduling depends on the scope of works and the technician's availability:
What Can You Prepare Before Booking?
To help the technician judge the problem faster and quote more accurately, you can prepare the following before booking:
You can first send photos and sizes on WhatsApp for a preliminary quote, then arrange a technician's on-site assessment.
Real Case: Discovering a Window-Edge Leak Just Before the New Year
During the year-end clean, a private flat owner found water marks and mould spots on the wall at the corner of the bedroom window sill. He remembered that a little water had seeped in during several heavy rainstorms, but he had never dealt with it.
On inspection, the technician found that the silicone sealant between the window frame and the wall had cracked, and the silicone rubber weatherstrips on the sash had hardened and shrunk. Because the owner had booked the inspection early, the technician scraped out the old sealant, re-applied silicone sealant for waterproofing and replaced the weatherstrips on a sunny day in December, finishing before the New Year holidays so the owner could celebrate with peace of mind.
Frequently Asked Questions
Do technicians work over New Year's Day and Chinese New Year?
Generally not. Technicians generally do not work over the New Year's Day and Chinese New Year holidays, and schedules before the holidays are tight. If you want the works finished before the New Year, book an inspection and fix a works date as early as possible.
How long do aluminium window repairs before the New Year take?
A window inspection visit generally takes about 30 minutes; Four-Treasure Works repairs are generally done in one day; waterproofing works generally take 1 to 2 days depending on the situation. If new windows need to be custom-made, fabrication generally takes about two to three weeks, so arrange it early.
Is winter a good time for window-edge waterproofing?
Yes. Waterproofing works are best done on dry, sunny days, and the drier weather from year-end to early spring is a good time to deal with window-edge leaks, getting ready before the rainy and typhoon seasons.
Can I just replace the hinges on a few windows before the New Year?
Yes. When the window frame structure is sound, only the oxidised hinges need replacing, not the whole window. Amgen uses its own-brand 304 stainless steel hinges, tested to 50,000 open/close cycles.
Conclusion: Inspect Early, Arrange Early, Enjoy the New Year
Sorting out your aluminium window problems before the New Year makes your home safer and saves you carrying them into the New Year. Amgen Aluminium Windows holds licence MWC 316/2021 and provides aluminium window repair, Four-Treasure Works and window-edge waterproofing services, with on-site assessments across all 18 districts of Hong Kong.
Schedules before New Year's Day and Chinese New Year are limited. Send us photos on WhatsApp at 6586 3435, or fill in our quick quote form, to book a technician as early as possible.
Want to know what the repair costs?
Pick the parts giving trouble and how many, and it becomes a clear enquiry — no need to describe it yourself.
Start a repair quote




