Living beside a main road, along a railway, or near a market — traffic and street noise day and night, still unable to sleep even with the windows shut? For many Hong Kong owners, the top reason to replace windows is not appearance but soundproofing. Yet "soundproof windows" mean many things, with glass types and frame airtightness each playing a part — choose wrong and you may spend money without gaining quiet. This guide explains how soundproof windows work, compares glass options, and covers the key selection points before you replace.
Why Do Soundproof Windows Reduce Noise? Understand the Principle First
A "soundproof window" is not a single product but the combined result of frame airtightness + glass configuration + installation quality. Noise enters mainly through two routes: the gaps between sash and frame (insufficient airtightness), and sound transmitting through the glass itself.
To reduce noise, both must be addressed. Even high-spec acoustic glass won't help if the closed frame still has gaps or the silicone rubber weatherseals have hardened or shrunk — sound slips straight through the gaps. This is why a well-sealed window type (such as a projected window) with good airtightness often outperforms simply thickening the glass.
Note: no window can be "completely soundproof" — the industry measures performance by how many decibels are reduced. A reasonable expectation is markedly weaker noise and better sleep, not total silence.
Comparing Acoustic Glass: Single, Insulated, Laminated, Insulated Laminated, Vacuum
Glass is the core of soundproofing. Note that "acoustic glass" is an umbrella term, not one type of glass: insulated, laminated and insulated laminated glass are all called acoustic glass, so when comparing quotes, check the glass build-up and specification on the quotation. The common options in Hong Kong and their acoustic performance are roughly as follows:
| Glass type | Structure | Acoustic performance | Notes |
|---|---|---|---|
| Single glazing | One pane (commonly 5–6mm) | Weakest | Most original windows in older buildings |
| Insulated (double-glazed) | Two panes with a sealed dry-air gap, e.g. 6+12A+6 | Medium, mainly for heat insulation | Limited acoustic gain when both panes are the same thickness |
| Laminated glass | Two panes bonded with a PVB interlayer | Better — especially effective for low-to-mid frequency traffic noise | Also safer (does not shatter loose) |
| Insulated laminated glass | An insulated unit with one pane swapped for laminated glass, e.g. 5+0.76+5+12A+6 | Good — acoustic and thermal | Requires a 50 profile frame |
| Vacuum glass | Vacuum between panes | Best, but higher cost | Suits units demanding the utmost quiet |
In short: bothered by traffic noise → consider insulated laminated or laminated glass first; want heat insulation and energy saving, with modest noise needs → insulated glass; ample budget, seeking maximum quiet → vacuum glass. The actual choice should be advised by a technician based on your noise source and unit condition.
3 Key Points When Choosing a Soundproof Window
Beyond the glass, the following three points equally determine the result — note them before replacing:
In other words, a soundproof window is an integrated job of "glass + frame + installation", not just buying one thick pane of glass.
A Real-Life Scenario: A Roadside Bedroom in Prince Edward
Living in a unit facing a busy road in Prince Edward, Ms Chan had long been troubled by car and bus engine noise, sleeping lightly and waking easily. Her original single-glazed sliding window let street noise through clearly even when shut, and the silicone rubber weatherseals had hardened, leaving obvious gaps along the window edge.
After an on-site assessment, Amgen's technician recommended replacing the bedroom window with a projected window fitted with insulated laminated glass to improve airtightness and soundproofing, and re-sealed the frame perimeter with fresh silicone. After completion, Ms Chan reported that night-time traffic noise was noticeably weaker and her sleep improved considerably. This shows the point: choosing the right glass for the problem, together with airtightness and installation, is the key to soundproofing.
Frequently Asked Questions
Can a soundproof window completely block out noise?
No. Any window only "reduces noise" rather than achieving "complete soundproofing", with performance measured in decibels reduced. With suitable glass, good airtightness and proper installation, noise can be markedly weakened and sleep improved, but the interior will not become totally silent.
What is the difference between acoustic glass and insulated glass?
"Acoustic glass" is an umbrella term, and insulated glass is one type of it. A standard insulated unit (two panes of the same thickness, e.g. 6+12A+6) is mainly for heat insulation, with medium acoustic performance; the interlayer in laminated glass damps vibration, making it more effective against low-to-mid frequency traffic noise such as cars and bus engines. To get both heat and noise insulation, choose insulated laminated glass — an insulated unit with one pane swapped for laminated glass, so the two sides differ in thickness and it is noticeably quieter than a standard insulated unit. A technician should still assess your noise source.
Does replacing windows for soundproofing require a Buildings Department declaration?
If it involves replacing the entire aluminium window unit — even solely to improve soundproofing — it remains Class II Minor Works and must comply with Class II minor works declaration, supervised by a licensed contractor. Amgen (MWC 316/2021) can handle the entire declaration process on the owner's behalf.
Conclusion: Choose the Right Glass and Window Type for a Quieter Home
The effectiveness of a soundproof window depends on the combination of glass, frame airtightness and installation quality — not on one thick pane alone. Understand your noise source before replacing, then let a professional advise on the right fix so your money is well spent.
Before replacing, see our complete aluminium window replacement cost guide to plan your budget, or see our aluminium window replacement service — insulated and insulated laminated glass need a 50 profile frame, so handling it during a replacement is the most economical route; you can also improve soundproofing and waterproofing together through complete renovation works. Amgen Aluminium Windows holds licence MWC 316/2021 and offers free on-site assessments — our technicians analyse the noise source on site and recommend a suitable soundproofing solution. WhatsApp 6586 3435 to enquire.
Want to know what a replacement costs?
Enter the number of windows and their sizes and it becomes a clear enquiry — a free on-site measurement can be arranged.
Start a replacement quote




